SHYAM GROUP

Our TMT Bar is of:

Size : 8mm to 25mm.
Specification: IS- 1786/1985, Fe- 415 Grade.

Mechanical Properties :

0.2% Proof Stress	415	500 N/mm2	550
0.2% Proof Stress	480 N/mm2	525 N/mm2	575 N/mm2
Tensile Strength	550 N/mm2	600 N/mm2	660 N/mm2
Percentage age Elongation (min)	18.5%	14.5%

Bend Test	Satisfies ISI Standard Bend Test
Rebend Test	Satisfies ISI Slandered Rebend Test

Chemical Composition :

Constituent	Percentage Maximum
Carbon	0.30	0.30	0.30
Sulphur	0.060	0.055	0.055
Phosphorus	0.060	0.055	0.050
Sulphur & Phosphorus	0.011	0.105	0.100

For better and guaranteed weld ability Carbon shall be registered to0.25 Max.

Production Capacity Per Annum: 2.5LTPA of TMT Bars.

Why we are superior :

Bend ability : SEL Thermex TMT Bars exhibit very high bend ability due to low carbon content and high bend ability due to lower carbon content and higher elongation. They can withstand bending and rebending with initial diameters of 1D and 4D respectively, where D= Diameter of Bar.It is easier to work with these bendability.

Rust and Corrosion Resistant:

The main reason for failure in any reinforcement concrete structure is due to corrosion of the Tor Steel in the concrete ,where these steel corrode in exsistance of chloride ions.SEL Thermex TMT Bar due to its Thermo mechanical Treatment are very highly rust and corrosion resistant and is best suited in the humid and coastal states like West Bengal and Orissa

Cost Saving:

SEL Thermex TMT Bars are very cost effective and saves steel upto 20% being technical superior and having higher tensile strength than other TMT Bars.

Application:

SEL Thremex TMT Bars are much superior to conventional Tor steel by virtue to their various engineering properties and can be used for Residential building,Bridges,Dams,Industrial Establishments and all types of concrete reinforcement purposes.